1. Install the ScrewDrivers v4 Print Server Agent on each node of the print cluster
2. On one node go to Start > Programs > Tricerat > ScrewDrivers v4 Print Server Agent and open the ScrewDrivers Console.
3. Select Tools > Cluster Configuration
4. Note that this step will restart the clustered Print Spool service. If the nodes are part of a pre-existing Windows print cluster, all the necessary cluster information should be automatically filled in, and the setup is complete.

If a Windows print cluster is not currently setup, a new cluster will be setup...

- In the Cluster Name tab, the physical Cluster Name should already appear; below it, enter a network name for the ScrewDrivers cluster.

- In the Network Settings tab, select a network connection for the cluster, and enter an unused static IP and subnet mask for the print cluster

- In the Cluster Resources tab, select a shared disk to be used for the cluster's spool directory; you can optionally enter a name for the cluster that will appear under when viewed through Microsoft's cluster administration tool.

5. When connecting to the cluster in the Simplify Console, be sure to use the ScrewDrivers Print Cluster name and not the physical cluster or node name(s).